| |
| |
Click to enlarge |
|
| • |
Rear
jaw sliding bench vise. |
| • |
Dove
tail sliding guide ways. |
| • |
Nut
made of steel forging. |
| • |
Thread
rolled long lasting screw. |
| • |
Hardened
and ground jaws with the option of step jaws. |
|
|
| |
| Jaw
Width |
200mm/8" |
150mm/6" |
125mm/5" |
100mm/4" |
075mm/3" |
| Maximum
Opening |
275mm/11" |
200mm/8" |
150mm/6" |
112mm/4.5" |
075mm/3" |
| Clamping
Depth |
78 |
80 |
68 |
48 |
35 |
| Weight
in Kgs. |
41 |
32 |
18 |
7.5 |
2.4 |
| Request
for quote |
|
|
| TOP |
| |
| Super
Precision Drill Press Vise |
|
Click to enlarge |
|
| • |
Rugged
design provides precision and
power of clamping. |
| • |
Special
box type design gives easy working
and long life to vise. |
| • |
Jaws
made of alloy steel and are hardened
and grounded for better life. |
| • |
Powder
coating and nickel plating finish. |
| • |
Comes
in three different sizes. |
 |
| Jaw
Width |
150mm/6" |
120mm/5" |
060mm/4" |
| Max.
Opening |
180mm/8" |
145mm/6.3" |
080mm/5" |
| Weight
in kgs. |
22.5 |
13.5 |
02.3 |
| Request
for quote |
|
|
|
|
| TOP |
| |
| |
Click to enlarge |
|
| • |
Rear
jaw sliding bench vise. |
| • |
Dove
tail sliding guide ways. |
| • |
Nut
made of steel forging. |
| • |
Thread
rolled long lasting screw. |
| • |
Available
in two sizes. |
|
| Jaw
Width |
125mm/5" |
100mm/4" |
| Max.
Opening |
160mm/6.3" |
125mm/5" |
| Weight
in kgs. |
20 |
8.5 |
| Request
for quote |
|
|
|
|
| TOP |
| |
| |
Click to enlarge |
|
| • |
Eliminating
jaw lift and work lift. |
| • |
Higher
clamping power. |
| • |
Rigid
steel parts. |
| • |
Simple
mechanism, free from disorders. |
| • |
Ground
top and bottom of vise bed for
guaranteed accuracy. |
|
| Cat
No. |
HDMV-100 |
HVMD-150 |
| Jaw
width |
| inches |
4 |
6 |
| mm |
100 |
150 |
| Jaw
Opening |
| inches |
4 |
7 |
| mm |
100 |
180 |
| Approx
Weight in Kgs. |
15 |
45 |
| Request
for quote |
|
|
|
|
| TOP |
| |
| Drill
Press Vises Uni-Grip-Type |
|
Click to enlarge |
|
| • |
Light
weight vises precision milled
& ground. |
| • |
Can
handle round jobs of different sizes
in both ways horizontally and vertically. |
| • |
Has
better hand grip. |
| • |
Comes
in three sizes. |
| • |
Jaw
Width: 125 mm/5", 100 mm/4",
085 mm/3.35". |
|
|
|
| TOP |
| |
| Sliding
Movement |
| The
vise has rear jaw sliding movement.
- The
maximum load comes on rear jaw, which is supported
by the bench.
- The
chances of front jaw breakage reduces.
- The
chances of accidents get reduced. If the job falls
while loosening, it will fall on the table not on
floor.
- Jobs
of different sizes can be accomodated on the bench
side.
|
|
| |
| Same
Grip over the length |
| The
jaws are hardened and ground giving the same grip over
the length of jaws.
- The
Horizontal and vertical grooves act as V blocks while
holding circular jobs.
- Socket
head bolts are provided for better grip of jaws
|
|
| |
| Front
Mounting |
| The
vise has front mounting i.e. two holes in the front
and one at the back. This
eliminates the swivelling of vise while in use. |
|
| |
| Parallel
Movement |
| The
movement of rear jaw is done through dove tail guide
ways ensuring the parallel movement of rear jaw. The
force required at the handle is even through out the
travel of the rear jaw. |
|
| |
| High
Tensile Steel Nuts |
| The
Nuts are made from high tensile steel forgings. The
collinear arrangement where the screw moves into the
nut & protects the thread from metal chips, dust
etc.. This enhances the life of the vise. |
|
